Crossbows are a popular choice for new and experienced bowhunters. They offer a short learning curve and precision accuracy – an excellent feature for bowhunting – and are a fantastic way to have a little fun with archery. Before bowhunting with a crossbow, check your local and state regulations regarding approved bowhunting equipment. Equipment specifications vary by state.
The crossbow’s short learning curve and accuracy are thanks to its design. The bow part of a crossbow looks like a standard bow, only smaller and mounted horizontally. Like conventional bows, crossbows come in recurve and compound varieties.
With a typical recurve or compound bow, the archer pulls the bowstring and holds it in place, either with their fingers or a release aid. A crossbow is different – the bowstring is locked and held in place by a mechanical latch rather than physical strength. This feature, called the cocked position, makes crossbows an excellent option for archers with injuries. Also, accuracy improves because you don’t have to struggle against the bow’s weight when aiming.
Standard bows are held with one hand on the grip and one hand on the bowstring. Crossbows, on the other hand, are fired from a shouldered position. Both hands and the shoulder support the crossbow, giving you a steadier aim, whether in a treestand or ground blind. You can also use bipods, tripods and shooting sticks to get a rock steady aim.
A telescopic scope can further improve your accuracy because it helps you take precision aim even at far-away targets. Enhanced aiming, of course, helps ensure proper shot placement, enabling you to take advantage of coveted shot opportunities while bowhunting.
Anatomy of a Crossbow
Stirrup – A metal frame located at the front of the crossbow. Place your foot inside the stirrup to secure the crossbow during cocking.
Stock – A stock is considered the body of the crossbow. All other parts of the crossbow are attached to the stock. The front of the stock where you grip the bow is called the foregrip. The rear of the stock that rests against your shoulder is called the buttstock.
Limbs – The limbs provide the bow’s power. They flex and store energy to propel the bolt. Recurve crossbows have curved limbs. Compound crossbows have a pulley system, called cams, at the end of the limbs.
Bowstring – The bowstring connects both limbs and transfers the bow’s energy to the bolt.
Rail – The top of the foregrip is called the rail. This is where the arrow sits and the bowstring slides across.
Trigger – Crossbows have a trigger mechanism, which releases the latch that holds the bowstring. The trigger also has a safety that prevents accidental misfires.
Crossbow Arrows, aka “Bolts”
Crossbow arrows, called bolts, are made of carbon fiber or aluminum. They are shorter than standard arrows and are made specifically for crossbows. It’s important to only use manufacturer-recommended crossbow bolts. Manufacturers specify bolt length, weight, nock type and fletching requirements.
A cocking aid makes cocking your crossbow easier. These devices hook onto the string and increase mechanical advantage. When you purchase a crossbow at your local archery store, the staff can teach you how to use a cocking device.
Safe Handling and Storage
Safety is the most important part of a fun day of shooting. Always carry your crossbow in the uncocked position. Hold a crossbow with two hands and point it down and away from people. While at the range, keep your crossbow uncocked and unloaded unless you’re ready to shoot.
Never fire a crossbow without a properly loaded bolt. This is called a dry fire, and it will damage the crossbow and may injure the archer.
Most crossbows can only be uncocked by firing into a target. To safely unload your crossbow, make sure the crossbow bolt is loaded. When the range is clear, aim at the target, disengage your safety and fire your bolt.
Safely store and transport your crossbow using a crossbow case. This will protect your crossbow and prevent mishandling.
Steps for Safely Firing a Crossbow
These are general steps for loading and firing a crossbow. Please refer to your manufacturer’s instructions for specific procedures pertaining to your crossbow.
STEP 1: Load the Crossbow
Place your foot securely into the stirrup.
Set your cocking device per the manufacturer’s instructions. If you aren’t using a device, simply reach down with both hands and grasp the string. With a hand on each rail, hook the string with the index, middle and ring fingers. Keep your thumbs on the side of the rail to help center the string while cocking the crossbow.
Stand up while pulling the string upward. Continue to pull the string until it’s beneath the arrow-retention spring and the string latches into place, engaging the safety.
Ensure the safety is fully engaged in the “on” or “safe” position, indicating the crossbow is properly cocked. On most crossbows, you’ll hear an audible “click” when the string is fully cocked. Be aware that some crossbows you’ll need to hear two clicks before the bow is cocked.
STEP 2: Take Your Stance
Stand with feet shoulder width apart and your shoulders square to the target.
STEP 3: Load the Bolt
With one hand supporting the crossbow, remove an arrow (bolt) from the quiver. Place the bolt on the rail. On the bolt, one of the vanes will be a different color. Place the odd-colored vane down so it can slide through the groove in the rail. Slide the bolt until it is firmly seated against the string. You will know it is seated correctly when the bolt cannot slide further and the safety can be disengaged.
STEP 4: Getting Ready to Shoot
Point the crossbow safely downrange and away from people. Place your non-dominant hand at the center of the foregrip. Keep your thumb and fingers below the crossbow rail.
Place your trigger hand on the grip, keeping your finger away from the trigger. Next, put the buttstock against your shoulder. Firmly seat your cheek onto the stock. This will bring your dominant eye in line with the sight. Once you align your sight with the target, push the safety into the “fire” or “off” position.
STEP 5: Shoot
Settle the sight on the target and slowly squeeze the trigger with your index finger until the crossbow fires.
STEP 6: Follow-through
Keep your focus on the target throughout the shot. Then, lower the crossbow and get ready to shoot again.
Interested in trying a crossbow? Visit your local archery store and check out the options. You’ll find crossbows for recreational use, competitive use and bowhunting.
Note: Before bowhunting with a crossbow, check you local and state regulations regarding approved bowhunting equipment. Equipment specifications vary by state.